ps3 ylod fix part3 gilksy

Posted by admin On April - 9 - 2010

part 3 of 6 here it is as promised! use at your own risk! thanks go’s to boomont for supplying the original 60 gig ps3 that was the first to be brought back from the dead! DONATE IF YOU CAN! www.paypal.com enjoy check out part 4

Latest Videos

25 Responses so far

Omdullla Said,
@alltechn0 no, sorry. It is just not hot enough.

Posted on April 9th, 2010 at 6:46 pm
alltechn0 Said,
can i use a hair-drier plz answer

Posted on April 9th, 2010 at 7:40 pm
AshiixElainexx Said,
The moment I get the call from my guardian telling me I no longer have a warranty on my now useless PS3, I’m definitely going to try this tutorial.

Posted on April 9th, 2010 at 8:15 pm
brendanpallett Said,
no they are a con u will get yellow light of death again in 2 weeks sorry

Posted on April 9th, 2010 at 8:59 pm
6070505 Said,
@devontek Than what are we supposed to do?

Posted on April 9th, 2010 at 9:26 pm
devontek Said,
No. The problem will come back again because the original defect is not being corrected in gilsky1’s “fix” and this “fix” thermally stresses the GPU since the heating of the GPU is not ramped up at the proper rate per design.

Posted on April 9th, 2010 at 9:48 pm
devontek Said,
No. The problem will come back again because the original defect is not being corrected in gilsky1’s “fix” and this “fix” thermally stresses the GPU since the heating of the GPU is not ramped up at the proper rate per design. This “fix” is only allowing the GPU to be temporarily resoldered. And the adding of the new Thermal compound (commonly inaccurately called “grease”) will improve cooling but will not correct the issue since it is not related to the real defect.

Posted on April 9th, 2010 at 10:01 pm
devontek Said,
No. The problem will come back again because the original defect is not being corrected in gilsky1’s “fix” and this “fix” thermally stresses the GPU since the heating of the GPU is not ramped up at the proper rate per design. This “fix” is only allowing the GPU to be temporarily resoldered. And the adding of the new Thermal compound (commonly inaccurately called “grease”) will improve cooling but will not correct the issue since it is not related to the real defect.

Posted on April 9th, 2010 at 10:11 pm
dodongledo Said,
thanks alot pal, i had the same problem but with your step by step instuction i’ve fixed it. class mate. nice one

Posted on April 9th, 2010 at 11:07 pm
hereal2010 Said,
hey i want to fix my PS3 but i just need to know all the screwdriver types and where to get them. . . plz help

Posted on April 9th, 2010 at 11:57 pm
hereal2010 Said,
after fixing my ylod will buying a fan help with heating problems and reduce the chance of it happening again?

Posted on April 10th, 2010 at 12:07 am
SuperUltraAslan Said,
Jawoll mein psp3 geht wieder vielen dank und die sagen es geht bei ps3 40 gb nicht stimmt gar nicht . . . !!!!!!! Weil meins geht endlich man

Posted on April 10th, 2010 at 12:59 am
robthesamplist Said,
it would take about 0. 1 of a second to of a to burn all the hairs in the area and then seriously burn after that

Posted on April 10th, 2010 at 1:53 am
hod05 Said,
what would happen it you gave someone a blast in the face with the heat gun

Posted on April 10th, 2010 at 2:38 am
undertaker27331986 Said,
groovylicks6 i will repair yours i have fixed over 100 ps3s i know what im doing and he charges 75 dollars i charge 35 u pay shipping i will hae it done in 24 hours if anybody want a ps3 fix of any hit me up or u can trade it in and 50 for my refurbs

Posted on April 10th, 2010 at 2:52 am
devontek Said,
I agree 100% that this is only a patch or temporary fix (not to mention that the extreme heat used by gilksy1 is beyond the thermal specifications of the BGA package thus introducing thermal stress)
I disagree that the PS3 cannot be properly fixed with this issue.
Once the original issue is corrected and the BGA ICs are PROPERLY reflowed, then the PS3 is really.
This is actually caused by a design flaw (that still exist in the new slim model but is a little bit better in managing the flaw)

Posted on April 10th, 2010 at 3:51 am
devontek Said,
Hello Madara96.
I an an engineer working for a company that repairs PS3, laptops, etc.
The reason why you are having problems is that the “fix” by gilksy1is only addressing the end result of the PS3 problem and not the original issue.
I would like to post the real problem but due to the threat of losing my job I cannot.
Many reading this will not like this answer, but I have no choice.
gilksy1’s fix is like putting a bandage on a broken leg, it may appear as a fix but the leg is still broken.

Posted on April 10th, 2010 at 3:52 am
fireshot22 Said,
This method is only for a temporary use of the PS3, b/c once you have the Ylod, the ps3 isBASICALLY dead even after it is “fixed. ” What you should do is either Pay $150+tax for a refurb’d slim to Sony ORpay $299 for a new PS3 Slim.
This method is inteded for:
—-$cheap cheap way for temporary power restoration
—-take advantage of the power to back up your saved files via external source(usb, harddrive)
— transfer saved files to the your new ps3

Posted on April 10th, 2010 at 4:28 am
intensemadman465 Said,
a hair dryer will NOT work! A 450 C heat gun will WORK! If you put too much heat paste on it will your PS3 will OVERHEAT within 10 mins so apply just a little

Posted on April 10th, 2010 at 4:51 am
2Fuzzybunnys Said,
can I use a gun that goes to 450 C? or is that too hot?

Posted on April 10th, 2010 at 5:23 am
Madara96 Said,
i did this processs and it the ps3 started up and everything but then after the fan started breathing hard and at the top side of my tv it said ps3 system is getting to hot and shut off. . im wondering is it because i did not apply enough thermal compound or what,

please respond gilksy1

Posted on April 10th, 2010 at 5:28 am
hylite99 Said,
can you use a hair dryer instead of heat gun and still use the artic silver thermacompound stuff too?

Posted on April 10th, 2010 at 5:54 am
aznxplayer7o2 Said,
@rampagefan33 no you can’t. . . . l hair dryer doesn’t get as hot as a heat gun. Trust me I tried haha

Posted on April 10th, 2010 at 6:25 am
shinycollector Said,
@rampagefan33 NIGGA IM USING THAT TOO? WILL THIS WORK?

Posted on April 10th, 2010 at 7:13 am
rampagefan33 Said,
@0808dddddddddddddddd me 2 not finished yet did it work for you?

Posted on April 10th, 2010 at 7:43 am

Add your comment

www.youtube.com Click here to watch the last episode of A World Turning! A World Turning: Chapter 5 (Resident Evil 5 Machinima) With no cocaine, Chris and Sheva must continue along their path to find Irving. Whether bickering about past Resident Evil trends, or fighting a giant Leech monster, they will stay a team until the end.wellmaybe DIRECTOR’S CHANNEL www.youtube.com DIRECTOR’S TWITTER www.twitter.com – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - Follow Machinima on Twitter! Machinima ‪twitter.com Inside Gaming ‪twitter.com Machinima Respawn ‪twitter.com Machinima Entertainment, Technology, Culture ‪twitter.com FOR MORE MACHINIMA, GO TO: www.youtube.com FOR MORE GAMEPLAY, GO TO: www.youtube.com TAGS: yt:quality=high Resident Evil: Darkside Chronicles Capcom Wii UPC 013388350155 Machinima Modern Warfare 2 UberHaxorNova Uber Haxor Nova Paragon Halo 3 Mods A World Turning

Tags: gig, gilksy, part, part3, PS3, use, YLOD